Tilt Garage Doors Perth
One clean panel, no tracks across the ceiling — tilt and counterweight doors supplied, installed and repaired across Perth, from flush architectural fronts to older doors that just need new arms.
- Local Perth Installers
- Custom Cladding Options
- Arms & Spring Repairs
- Lifetime Workmanship Warranty
Free Measure & Quote
Quick Answer
Capital Garage Doors installs and repairs tilt garage doors across Perth. A new tilt door typically costs $3,000–$5,000 supplied and installed; custom-clad and oversize doors range $5,000–$15,000, and replacing the pivot arms and springs on an older tilt door is $1,200–$1,800. A tilt door is a single rigid panel that swings up on counterweighted pivot arms — the style to pick when you want one uninterrupted face for architectural cladding, or when your garage has almost no headroom for tracks.
One Panel, Endless Finishes — and Repairs for the Old Ones
A tilt door (also called a counterweight door) is a single rigid panel that pivots up and back on spring-balanced arms instead of bending through tracks. Because the face is one uninterrupted sheet, it's the door builders and architects reach for when the garage front should disappear into the façade — clad it in the same material as the wall and the door all but vanishes.
We supply new tilt doors made to measure in Colorbond-style steel or ready for custom cladding — timber battens, composite panels or fibre-cement to match your build. The counterweight system is sized to the finished panel weight, which is the detail that separates a door that glides from one that slams: heavier custom cladding needs the arms and springs specified for it, not adjusted after the fact.
Perth also has thousands of older tilt doors from the 70s, 80s and 90s still swinging on their original hardware. If yours has started drifting, sticking or dropping on one side, the frame is usually fine — worn pivot arms and tired springs are the culprits, and we replace them as a matched kit rather than condemning a door with decades of life left in it.
Common Problems We Fix
What's Included
- On-site measure of the opening, headroom and side room
- New door supply — steel finish or clad-ready frame
- Counterweight arms and springs sized to the panel weight
- Removal and disposal of the old door
- Pivot arm and spring kit replacement on existing doors
- Optional opener rated for tilt-door weight, fitted and programmed
- Balance and safety testing through the full swing
- Lifetime workmanship warranty
How Our Repair Process Works
Measure and quote
We check the opening, headroom and side room, and price the door or repair kit exactly.
Choose the finish
Colorbond-style steel, or a clad-ready frame for timber, composite or fibre-cement.
Built for the weight
Arms and springs are specified to the finished panel weight, cladding included.
Installation day
Old door out, new panel hung and counterweighted, swing tested edge to edge.
Handover & warranty
We program any opener, show you the manual release, and register the warranty.
Cost Guidance
Typical Perth supplied-and-installed ranges from our own price list. Your exact quote depends on the panel size, finish and cladding weight — confirmed upfront:
| Scenario | Guide Price | Notes |
|---|---|---|
| New garage door — standard (supply & install) | $3000–$5000 | Supplied & installed including removal of the old door, new tracks and hardware. |
| Tilt-door arms kit + springs | $1200–$1800 | Tilt-door conversion/replacement arms kit with springs. |
| New door — commercial / custom | $5000–$15000 | Commercial and custom doors — supplied & installed. Priced to your opening and specs. |
| Motor / opener replacement | $770–$990 | New opener supplied, installed and programmed — including remotes. |
Final pricing depends on the cause, parts required, and door size — confirmed on inspection before any work begins.
Why Choose Capital Garage Doors
Counterweighted properly
Arms and springs sized to the real panel weight, so the door glides instead of slamming.
Repairs, not just replacements
Matched arm-and-spring kits keep a sound older door swinging for years more.
Clad it your way
Timber battens, composite or fibre-cement — one flush panel that matches the façade.
Fits where tracks don't
No ceiling tracks and minimal headroom needed — ideal for carports and low garages.
Old door taken away
Removal and disposal of your existing door is part of the job, not an extra.
Warranty-backed
Manufacturer warranty on the door, lifetime workmanship warranty on the install.
Areas We Service
Capital Garage Doors provides this service across Perth, including:
- Subiaco
- Victoria Park
- South Perth
- Bayswater
- Fremantle
- Applecross
- Kalamunda
- Midland
- Scarborough
- Willetton
Don't see your suburb? We still likely cover it.
Request QuoteWhat Perth Homeowners Say
“So impressed with the support from the team after two garage doors went, with a home open looming. They inspected, ordered parts and completed repairs within 24 hours. Highly recommended.”
Trina S. · Emergency Repairs
Frequently Asked Questions
A tilt door — also called a counterweight door — is a single rigid panel that swings up and back on spring-balanced pivot arms, rather than bending through tracks like a sectional or coiling like a roller door. The one-piece face makes it the best canvas for architectural cladding, and the mechanism needs very little headroom.
Get a quote
Book Tilt Garage Doors Perth in Perth
Licensed, insured, and local. Send the form and we'll get back to you fast with a fair, no-obligation quote — or call now and speak to a technician.
- 0475 333 335
- 6 Carnegie Parade, Southern River WA 6110
- Mon–Fri7 AM – 6 PMSat–Sun8 AM – 4 PM
Request a Free Quote
Prefer to call? 0475 333 335Ready to upgrade your
garage door experience?
Whether you need an emergency repair right now or a smart quote for a new installation, we've made getting help faster and easier than ever.