Roller Door Prices Perth
What a roller door costs in Perth from our current price list: a new door supplied and installed, a motor, a removal and refit, and the common roller door repairs.
Quick Answer
A new roller door in Perth costs $3,000–$5,000 supplied and installed, including removal of your old door and new guides and hardware; a single door sits toward the lower end of that range and a wide double door toward the top. Adding a roller door motor is $770–$990, programmed with remotes. Oversized and commercial roller doors are made to the opening, usually $5,000–$15,000. Every figure is confirmed in a fixed written quote after we measure.
Roller Door Prices in Perth: New Doors, Motors & Repairs
Guide prices from our current list for a new roller door and the jobs that go with owning one. The width of the opening, the curtain profile and colour, and whether you want it motorised decide the final figure, which you'll have in writing before anything is ordered.
| Door / Job | What It Includes | Typical Range | Cost Factors | Best Next Step |
|---|---|---|---|---|
| New roller door (supply & install) | Old door removal, new door, tracks, hardware and fitting. | $3,000–$5,000 | Opening width and height, curtain profile and colour, single or double | Book a measure-and-quote visit |
| Roller door motor (supply & install) | New motor, installation, programming and remotes. | $770–$990 | Motor model, door weight, rail type | Get a supplied-and-installed quote |
| Roller door removal & reinstall | Taking your roller door down and refitting it after rendering or building work | $880–$1,500 | Door width, site access, condition of the curtain and springs | Tell us when the building work is booked |
| Roller door spring (single) | Supply & fit of new spring(s), re-tension and safety test. | $240–$280 | Spring type and size, single vs double door | Call for same-day replacement |
| Roller door lock & lock arms | New centre lock and lock arms fitted to the curtain, keys supplied | $380–$440 | Lock type, curtain condition, whether the arms are bent or seized | Book a lock replacement visit |
| Roller door service / tune-up | Full tune-up: lubricate, re-tension, balance and safety check | From $140 + parts | Door condition, any parts needed | Book an annual service |
| Commercial roller door service or repair (from) | A starting guide for servicing or a straightforward repair on a commercial roller door | $280–$380 | Door size, duty cycle, motor type, parts needed | Send the door size and a photo for a firm quote |
All prices are indicative guides, not final quotes — your exact price is confirmed on-site, free and with no obligation.
More on pricing:Full Perth garage door price listGarage door installation costGarage door repair cost guideSpring & cable replacement costMotor replacement costService & maintenance cost
What Changes the Price of a Roller Door
Width and height
A single-car roller door is the simplest and cheapest new door we fit. A double door needs a longer, heavier curtain, a bigger drum and stronger springs, which is why it sits toward the top of the $3,000–$5,000 range.
Curtain profile and colour
A standard steel curtain in a common Colorbond colour keeps the price down. Premium colours, a different profile or a matt or timber-look finish add to the door's cost but not to the fitting.
Manual or motorised
A manual roller door is lifted by hand and locked with a centre lock. A roller door motor at $770–$990 adds remotes and, on some models, battery backup and app control.
Oversized and commercial doors
Openings wider than a standard double, very tall doors and industrial units need a heavier curtain, a wind rating and often a three-phase or high-cycle motor, so they are priced to the opening, usually $5,000–$15,000.
Access and the old door
Removing the old door is part of a standard install. A tight side room, a drum that has to be fitted at height, or brickwork and lintels that need making good once the old door is out can add time.
Repair instead of replace
A roller door with a sound curtain rarely needs replacing. A spring at $240–$280, a lock at $380–$440 or a service from from $140 + parts often puts it right for a fraction of a new door.
Roller Door Costs: Common Perth Jobs
Replacing a worn single roller door
The most common new-door job we do. A standard single door sits toward the lower end of the $3,000–$5,000 range, supplied and installed with the old door removed. Keeping your existing motor is possible if it suits the new door; otherwise a new motor is $770–$990.
A double roller door for a two-car garage
The extra width means a heavier curtain, a bigger drum and stronger springs, so a double door sits toward the top of the $3,000–$5,000 range. Very wide or tall openings move into custom pricing, typically $5,000–$15,000, and we confirm that when we measure.
Rendering or building work
If the door is fine and only has to come off while the walls are rendered or the garage is extended, a removal and refit costs $880–$1,500, far less than a new door. We take it down before the trades start and refit it afterwards.
A roller door that won't open
Most jammed roller doors are a broken spring inside the drum ($240–$280), a seized lock ($380–$440) or a motor fault, not a door that needs replacing. A door stuck with the car inside after hours is attended as an emergency, which adds +$500.
Repair the Roller Door or Replace It?
A roller door is a simple machine, and most faults are cheap to fix. Our garage door repair cost guide lists every repair we price; replacement makes sense when the curtain itself is finished.
Repair is usually better when
- The curtain is straight, with no rust holes or creased slats
- The fault is one part: a spring, the lock, a guide or the motor
- The door only has to come off for building work: a refit is $880–$1,500
- It is a manual door you simply want motorised: a motor is $770–$990
Replacement may be better when
- Rust has gone through the curtain or the bottom rail
- Slats are creased or bent so the curtain jams in the guides
- The door was undersized or badly fitted and never ran well
- You are renovating and want a quieter, better-looking or insulated door
How a Roller Door Quote Works
Measure the opening
We measure width, height, headroom for the drum and side room for the guides, and check the lintel and the power supply if you want a motor.
Choose the door
Pick the curtain profile and colour, decide between manual and motorised, and add any extras such as a second remote or battery backup.
Fixed written quote
One written price for the door, the fitting and removal of the old door, agreed before the door is ordered.
Installation
The old door comes out, the new drum, curtain and guides go in, the springs are tensioned and the motor is programmed.
Handover
We run the door with you, show you the manual release and the lock, and explain the motor warranty and how to register it.
Related Services
Frequently Asked Questions
A new roller door costs $3,000–$5,000 in Perth, supplied and installed, with the old door removed and new guides and hardware fitted. A standard single door sits toward the lower end of that range and a double toward the top. Motorising it adds $770–$990. Oversized, industrial and custom-colour doors are priced to the opening, usually $5,000–$15,000, and every figure is confirmed in a written quote after we measure.
Get a Clear Quote
Prefer to call? 0475 333 335Ready to upgrade your
garage door experience?
Whether you need an emergency repair right now or a smart quote for a new installation, we've made getting help faster and easier than ever.