Custom Garage Doors Perth
Cedar battens, aluminium slats, timber-look composites and glass — designer garage doors made to measure for Perth homes, supplied and installed by one local team.
- Local Perth Installers
- Designed to Your Façade
- Made to Measure
- Lifetime Workmanship Warranty
Free Design Consult & Quote
Quick Answer
Capital Garage Doors designs and installs custom garage doors across Perth, typically $5,000–$15,000 supplied and installed depending on size and material — cedar and timber battens, powder-coated aluminium slats, low-maintenance timber-look finishes, and glass or perforated infills. The door is built on a sectional or tilt base sized to your opening, the finish is matched to your façade, and the springs and opener are specified for the finished panel weight. Every design is quoted exactly before anything is ordered.
The Door Is a Third of the Façade — Make It Count
On most Perth frontages the garage door is the single largest surface facing the street. A custom door treats it that way: vertical cedar battens that turn the garage into a feature, wide aluminium slats that line up with the fence, timber-look composites that match the entry door, or frosted glass panels that glow at night. If you can sketch it, it can almost certainly be built.
Custom doors are built on a proven base — usually a sectional door for insulation and quiet running, or a tilt panel when the design calls for one uninterrupted face. That means designer looks without prototype risk: standard tracks, standard springs and standard openers underneath, with the finish doing the talking. We work with genuine Australian-made doors as an authorised dealer for B&D, Steel-Line, Gliderol and Avanti.
Material choice is where we earn our keep. Real cedar is unmatched up close but needs re-oiling to stay that way; powder-coated aluminium battens give the same lines with almost no upkeep and shrug off coastal salt air; timber-look steel and composite panels split the difference on budget. We'll lay out the trade-offs plainly at the design consult, with samples, and the quote names the exact door and finish.
Common Problems We Fix
What's Included
- Design consult with material and finish samples
- On-site measure of the opening, headroom and side room
- Made-to-measure door on a sectional or tilt base
- Springs and hardware sized to the finished panel weight
- Removal and disposal of the old door
- Optional quiet opener, fitted and programmed
- Balance and safety testing through full travel
- Lifetime workmanship warranty
How Our Repair Process Works
Design consult
We look at the façade, talk materials and budget, and bring samples to the measure.
Exact quote
The quote names the base door, cladding, finish and opener — nothing vague.
Made to order
Your door is manufactured to the millimetre — we confirm the lead time upfront.
Installation day
Old door out, new door hung on springs sized for its real weight, tested end to end.
Handover & care guide
Opener programmed, finish care explained, lifetime workmanship warranty registered.
Cost Guidance
Typical Perth supplied-and-installed ranges from our own price list. Custom work is quoted to the design — these are the honest brackets we see:
| Scenario | Guide Price | Notes |
|---|---|---|
| New door — commercial / custom | $5000–$15000 | Commercial and custom doors — supplied & installed. Priced to your opening and specs. |
| New garage door — standard (supply & install) | $3000–$5000 | Supplied & installed including removal of the old door, new tracks and hardware. |
| Motor / opener replacement | $770–$990 | New opener supplied, installed and programmed — including remotes. |
Final pricing depends on the cause, parts required, and door size — confirmed on inspection before any work begins.
Why Choose Capital Garage Doors
Designed to the façade
Battens, slats and finishes matched to your cladding, fencing and entry door.
Proven base underneath
Sectional or tilt mechanics with standard parts — designer looks, no prototype risk.
Honest material advice
Real cedar vs timber-look aluminium vs composite — trade-offs explained with samples.
Coast-ready options
Powder-coated aluminium and marine-grade finishes for beachside suburbs.
Weighted correctly
Cladding adds kilograms — springs and openers are specified for the finished door.
One team, start to finish
Design, measure, manufacture coordination and install by the same local crew.
Areas We Service
Capital Garage Doors provides this service across Perth, including:
- Applecross
- South Perth
- Hillarys
- Scarborough
- Subiaco
- Fremantle
- Joondalup
- Victoria Park
- Ellenbrook
- Canning Vale
Don't see your suburb? We still likely cover it.
Request QuoteWhat Perth Homeowners Say
“Capital Garage Doors provided exceptional service from start to finish. Their team was professional, prompt and knowledgeable, ensuring my garage door was repaired efficiently. The quality of work exceeded my expectations and the pricing was fair.”
Khaled K. · Repairs
Frequently Asked Questions
Most custom doors land between $5,000 and $15,000 supplied and installed, depending on size, base type and material — a cedar-batten double door sits at the upper end, powder-coated aluminium slats and timber-look steel usually less. For comparison, a standard door is $3,000–$5,000. The design consult produces an exact itemised quote before anything is ordered.
Get a quote
Book Custom Garage Doors Perth in Perth
Licensed, insured, and local. Send the form and we'll get back to you fast with a fair, no-obligation quote — or call now and speak to a technician.
- 0475 333 335
- 6 Carnegie Parade, Southern River WA 6110
- Mon–Fri7 AM – 6 PMSat–Sun8 AM – 4 PM
Request a Free Quote
Prefer to call? 0475 333 335Ready to upgrade your
garage door experience?
Whether you need an emergency repair right now or a smart quote for a new installation, we've made getting help faster and easier than ever.